Selected:

Gas chlorine pressure reducing…

Gas chlorine pressure reducing valve M 3480 C

Capacity: up to 200 kg/h
The pressure reducing valve secures pressure independent operation of Vacuum regulator and prevents, in relation to pressure and temperature changes, liquefaction of chlorine gas.

Description

Gas chlorine pressure reducing valve is used to sink down the unregulated gas pressure to a steady operating gas pressure.

General Info

GENERAL
The M 3480 C gas chlorine pressure reducing valve is used to sink down the unregulated gas pressure to a steady operating gas pressure. The pressure reducing valve secures pressure independent operation of Vacuum regulator and prevents, in relation to pressure and temperature changes, liquefaction of chlorine gas.

OPERATION PRINCIPLE
Through the adjustable screw the valve cone can be lifted above the valve seat within defined limits, so that the operating pressure can be set to any value between 1 and 3 bar for Cl2. Pressure fluctuations are compensated by the spring-loaded double diaphragm system, so that the operating pressure is kept constant (at constant flow).
If the operating pressure exceeds the set value, the spring-cone diaphragm system enables the valve to close.

INSTALLATION
The gas chlorine pressure reducing valve is always mounted in a chlorine system, so the installation depends very much on the system. When taken from the packing box, the valve must be mounted as soon as possible, in other case it must be stored in a dry place. No moisture should enter the valve! A valve has two flanges and is mounted in the chlorine gas system pressure line with counter flanges and tightens up with screws. The valve must be mounted to the wall or to a construction with the attached L-piece. If the pressure gauge is mounted onto the valve, than it must be mounted before the valve is mounted. To do that, remove the plug screw. Prepare the pressure gauge and put some special chlorine gas resistant glue on the screw. Screw the pressure gauge in and remove the surplus glue with the rag. Watch how the scale is turned. Now the correct pressure can be set.

Technical Data

Capacity: up to 200 kg/h

Nominal pressure: 16 bar
Counter pressure adjustable: 1-3 bar (Cl2)
Weight: 12,5kg
Materials:
Diaphragm: silver
Valve seat: PVDF for Cl2
Spring: Hastelloy C, silver-plated
O-Rings: Viton for Cl2
Enclosure: Brass for Cl2
Connections: On request!

Optional:
Gas pressure gauge R1/4”, range 0-16 bar

Quotation / Enquiries

How Can We Help You

In order to provide you with the most accurate quote possible, please provide us with the following
information:

If you require a quote please provide details using fields below

×
×

Cart