Selected:

Chlorine gas detection sensor…

Chlorine gas detection sensor M 2103 C

– No chemical additives necessary
– Signal proportional to gas concentration
– Minimal maintenance costs

Description

The M 2103 C series Controlmatik ABW chlorine gas detection sensor is designed to detect and indicate chlorine concentrations in the air.

General Info

GENERAL

The M 2103 C series Controlmatik ABW chlorine gas detection sensor is designed to detect and indicate chlorine concentrations in the air and to provide safety in storage areas and in places where the gaseous chlorine and Sodium Hypochlorite are dosed.
The sensor is mounted in an IP 65 housing and is connected via connector to the amplifying electronics, which is mounted on the same housing.
The sensor is connected to the unit with two-wire current loop signal and operates on the basis of chemical cell and a diffuse capillary blockade. The hydrochloric acid concentrate in the chemical cell is regenerated during the chemical reaction and a free oxygen is released; the quantity of the released oxygen defines the signal at the output.

Technical Data

Measuring unit: PPM
* 1 PPM Cl2 = 3,214 mgCl2/m3
Temperature range: from – 20 to + 50ºC
Resolution at 20ºC: 0,1 PPM
Repeatability: 2%
Measuring range: 0-10 PPM or 0 – 20 PPM
Pressure operating range: from 90 to 1100 mBar
Relative moisture operating range – permanently: 15-90%
Response time: = 1min
Recovery time: = 3min
Product lifetime (without shock concentrations): 2 years
Current output: 4 – 20 mA
Supply voltage: 9 – 26 VDC
Protection: IP 65
Dimensions: 98 x 197 x 50 mm
Weight: 0.5 kga

Download - Product Sheet And Manuals

Chlorine-gas-detection-MANUAL_GB.pdf


Declaration_of_conformity_Chlorine_gas_detection_sensor_M_2103_C.pdf


Chlorine_gas_detection_sensor_M_2103_C.pdf

Quotation / Enquiries

How Can We Help You

In order to provide you with the most accurate quote possible, please provide us with the following
information:

If you require a quote please provide details using fields below

×
×

Cart